Vicco Von Voss: Mastering Fine Furniture

Vicco and Jacqui's timberframed home

See more of Vicco's work at the Massoni Gallery Website.

Achieving truly fine furniture is as much about talent and experience as it is about relationships.  

On a recent return home to Baltimore, Maryland, for Thanksgiving, we got the chance to visit with our friends Jacqui and Vicco Von Voss, who live and work in Centerville on the Eastern Shore. Jacqui and Vicco live in idyllic splendor amid vast forests of maple, oak, and walnut trees. On their property are several structures Vicco built himself, including an award-winning timber-framed home and a large workshop where Vicco creates unique custom furniture of unparalleled quality.

My friendship with Vicco began only a few years ago, when I

Dye another day: Hardwood table tops get pop with trans-tint dye

Last week I was asked to make a companion table for a piece commissioned by Five Horses Tavern in Davis Square, Somerville.  Rather than try and make an exact copy (which wasn't a paragon of table top design, anyway), we decided to re-interpret the existing table's themes and wood species.  I saw it as a chance to

My first hexagonal aquarium cabinet & canopy

I was recently commissioned to build a cabinet and canopy for a 45 gallon hexagonal aquarium.  It was my first hexagonal cabinet, and it presented the unique challenges associated with 45 degree (rather than 90 degree) corners.  In order to play-up the hexagonal shape of the cabinet, I made special tapered panels for the front doors.  These panels, trapezoidal in shape, helped to give this burly cabinet a little height and lift.  Of course, it also gets lift from being 36" from the floor to the bottom of the tank, which is my standard practice with aquarium cabinets (for some reason I never see anything else over 34", more commonly 30").

The cases for the cabinet and canopy are 100% solid cherry, except for the lid on the canopy, which is of cherry veneered plywood with a cherry hardwood edge. 

Apart from the 45 degree corners, this was also my first time putting a hardwood edge on plywood using a miter lock bit to cut a glue-joint.  The doors are my first non-symmetrical panels.  This also represents my second attempt at making solid-wood raised panels. 

A child's bookshelf in cherry

Recently, a friend asked me to make a bookshelf for his daughter, who turned 3 a couple of weeks ago. It's the perfect height for a child, and has space for large picture books, as well as more grown-up chapter books. The design is one I like a lot, and I plan to refine it further in the future.

In fact, you may notice that the finished piece on the left is different from the raw piece on the right.  The one on the right didn't seem quite right, so I built a second piece (with better proportions), which was definitely a step in the right direction!

Fluval Nano aquarium stand in cherry and purple heart

Recently, I got a commission from Skipton Unique Aquaria and Reptiles in Boston, MA, to build a nice stand for a Fluval Nano reef aquarium display next to the store's checkout counter.  I took some photos of the stand in my shop while I waited for the last coat of oil to dry.

The project began as a very basic frame and panel stand.  As I try to do at least one new thing with every project, this was the first time I used my router table to cut raised profiles on hardwood panels.  Previously, all my frame and panel cases used plywood panels. 

I wanted to give a subtle "lift" to the stand, and so I went with top and bottom horizontal panels with a sharp bevel running along their edges.

About halfway through the build, I started thinking I should push the envelope just a little bit.  And around that same time, I ran out of cherry lumber, with the adjustable shelves still left to make.  So I dug out a nice piece of purple heart, and cut the shelves from that - making a nice little surprise for anybody who opens the front door of the stand.  I wanted to give a hint of what was inside, so I hand-carved a door handle out of purple heart as well, and also added two vertical purple stripes to the back panel.

The handle was made by first cutting profiles on either side of a stick of purple heart with a 3/4" core box router bit.  Then, I cut the end profiles on the band saw.  After cleaning up the curves on my 6"x48" linishing sander,  I cut out the sides of the handle on the band saw, giving it an hourglass shape.  I finished it off with 220 grit sandpaper in the palm of my hand.  The result is cool and curved and smooth. 

The photos show the stand before rubbing out the oil finish, which will impart a smooth sheen.

CLICK "READ MORE" (in blue below) TO SEE THE PHOTOS

New Video: the Wine Bar Video Tour

I am so happy about my new Wine Bars, I want to tell the world!  But I'll settle for a YouTube video...

Here is my second YouTube video - the Wine Bar Video Tour.  It's another narrated slideshow, telling all about how I make Wine Bars, their design, and how they can be used to solve all sorts of wine-related challenges in your home or business. 

It's available on YouTube here: http://youtu.be/rN_Skx1jx3A

and also embedded in this post, here: